Memmert Waterbath WTB15

Memmert Waterbath WTB15 | Copens Scientific Malaysia

Memmert Waterbath WTB15

Memmert Waterbath WTB15 is ideal for the temperature control of ointments, emulsions, samples, plates and nutrient solutions in the laboratory, as well as warm storage and calibration in the industrial segment.

Product Dimensions

Technical Specification


Temperature sensor digital temperature sensor, mounted on the outside of the bath
Temperature Setting Celsius / Fahrenheit
Working temperature range at least 5 above ambient to +100 (with cover, depending on ambient pressure)
Setting temperature range +10 to +100 °C
Setting accuracy temperature 0.1 °C

Control technology

Calibration 2-point calibration
Controller intuitive 3.5″ colour graphic display with touch screen
Controller digital display of set and actual temperature and of (remaining) programme time


Temperature control two-stage safety system to prevent overtemperature
Temperature control individually adjustable overtemperature alarm, visual and acoustic
Temperature control Independent temperature limiter to switch off the heating in case of failure
Autodiagnostic system microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator

Heating concept

Heating corrosion-proof large-area heating on the outside of the interior

Standard equipment

Cover Stainless steel gable cover
Drain system innovative drain system – easy to empty
Timer digital timer from 1 min. up to 99 hours 59 min., visual and acoustic

Stainless steel interior

Interior Deep-drawn stainless steel tray (stainless steel W.St. 1-4301), without corners and edges for easy cleaning incl. central drain (no disturbing installations)
Dimensions W x H x D in mm w(A) x h(C) x d(B): 482 x 150 x 277 mm
Volume 17 l
Liquid level min. 20 mm
Liquid level max. 114 mm

Textured stainless steel casing

Dimensions w(D) x h(E2) x d(F): 554 x 348 x 349 mm

Electrical data

Voltage Electrical load 230 V, 50/60 Hz approx. 1420 W

Ambient conditions

Installation The vent openings in the left and back side must remain unobstructed. Minimum wall spacing on all sides is 80 mm. The minimum spacing from the top of the bath to the next ceiling is 750 mm.
Ambient temperature +5 °C to +40 °C
Humidity rh max. 80 %, non-condensing
Overvoltage category II
Pollution degree 2

Packing/shipping data

Transport information The appliances must be transported upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. DE 66812464
Dimensions approx incl. carton w x h x d: 670 x 530 x 400 mm
Net weight approx. 9 kg
Gross weight carton approx. 14 kg

Standard units are safety-approved and bear the test marks

CE Logo