Maximum energy efficiency in continuous operation – tailor-made for stability studies according to ICH guidelines, stability tests for cosmetics and foods as well as environmental testing and material testing.
The Peltier-cooled climate chamber HPPeco is specifically designed for stability studies according to ICH guidelines (Q1A) as well as stability tests for cosmetics and food. With the large working range ascending from the freezing point, the climate chamber is also ideal for working materials testing and environmental tests in industry.
Product Dimensions
Technical Specification
Temperature
Setting temperature range
without light, with humidity: +5 to +70 °C
Setting temperature range
without light, without humidity: 0 to +70 °C
Working temperature range
without light, with humidity: +5 (at least 20 below ambient temperature) to +70 °C
Working temperature range
without light, without humidity: 0 (at least 20 below ambient temperature) to +70 °C
Setting accuracy temperature
0.1 °C
Temperature sensor
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Humidity
Setting range humidity
10 – 90 % rh
Humidity
humidity supply with distilled water from external tank by self-priming pump
Humidification
humidification by hot steam generator
Dehumidification
dehumidification by cold trap using the Peltier technology
Setting accuracy humidity
0.5 % rh
Control technology
ControlCOCKPIT
TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
temperature (Celsius or Fahrenheit), relative humidity, programme time, time zones, summertime/wintertime
Timer
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function HeatBALANCE
adapting the distribution of the heating performance of the upper and lower heating circuit from -50 % to +50 %
Function SetpointWAIT
the process time does not start until the set temperature is reached
Calibration
three freely selectable values each, temperature and humidity
Communication
Interface
Ethernet LAN, USB
Documentation
programme stored in case of power failure
Programming
AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
Safety
Temperature control
over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY
additionally integrated over- and undertemperature protection “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature
Autodiagnostic system
integral fault diagnostics for temperature and humidity control
Alarm
visual and acoustic
Heating concept
Peltier
energy-saving Peltier heating-/cooling system integrated in the rear (heat pump principle)
Standard equipment
Standard works calibration certificate
+25 °C / 60 % rh, +40 °C / 75 % rh
Internals
2 stainless steel grid(s), electropolished
Standard accessories
Water tank including connection hose (110-750: 2,5 liter, 1060-2200: 10 liter)
Door
fully insulated stainless steel doors with
2-point locking (compression door lock)
Stainless steel interior
Dimensions
w(A) x h(B) x d(C): 1040 x 1200 x 850 mm (d less 32 mm for fan – Peltier)
Volume
1060 l
Max. number of internals
14
Max. loading of chamber
200 kg
Max. loading per internal
20 kg
Textured stainless steel casing
Dimensions
w(D) x h(E) x d(F): 1224 x 1720 x 1005 mm (d +56mm door handle & +111mm Peltier element)
Installation
on lockable castors
Housing
rear zinc-plated steel
Electrical data
Voltage
Electrical load
230 V, 50/60 Hz approx. 1400 W
Ambient conditions
Set Up
The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
Ambient temperature
16 ºC to 40 ºC
Humidity rh
max. 70 %, non-condensing
Altitude of installation
max. 2,000 m above sea level
Overvoltage category
II
Pollution degree
2
Packing/shipping data
Transport information
The appliances must be transported upright
Customs tariff number
8419 8998
Country of origin
Federal Republic of Germany
WEEE-Reg.-No.
DE 66812464
Dimensions approx incl. carton
w x h x d: 1370 x 1970 x 1300 mm
Net weight
approx. 251 kg
Gross weight carton
approx. 331 kg
Standard units are safety-approved and bear the test marks
×
×
Product Disclaimer
We do not classify our products as medical devices. Our products are recommended for laboratory professional use only.
